Delivery Scope; Intended Use; Tool Specifications; Ec Declaration Of Conformity - Würth BMH 45-XE Manual Del Usuario

Symbol Meaning
Low speed/impact rate
High speed/impact rate
Tool holder
Apply a light coat of grease to the
shank end of the application tool
Service Indicator
P Rated power input
1
E Impact energy per stroke according to
EPTA-Procedure 05/2009
n No-load speed
0
Restarting Protection
Ø Drilling diameter, max.
Concrete
Brickwork
Twist drill bit
Break-through drill bit
Core bit
Weight according to
EPTA-Procedure 01/2003
Protection class
L Sound power level
wA
L Sound pressure level
pA
a Vibration total value
h
K Uncertainty

Delivery Scope

Rotary and demolition hammer, auxiliary handle.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our
accessories program.

Intended Use

The machine is intended for hammer drilling in concrete, brick
and stone as well as for chiselling.
For damage caused by usage other than intended, the user is
responsible.

Tool Specifications

The tool specifications of the machine are listed in the table on
page 175.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries, these
values can vary.
EC-Declaration of Conformity
We declare under our sole responsibility that the product
described under "Tool Specifications" is in conformity with all
relevant provisions of the directives 2011/65/EU,
2014/30/EU, 2006/42/EC including their amendments
and complies with the following standards:
EN 60745-1, EN 60745-2-6.
Technical file (2006/42/EC) at:
Adolf Würth GmbH & Co. KG, PFW,
Reinhold-Würth-Straße 12–17
74653 Künzelsau, GERMANY
Gerd Rössler
Managing Director
Würth International AG
Aspermontstrasse 1
7000 Chur
SWITZERLAND
31.07.2014
Patrick Kohler
Head of Power Tools/
Material Processing
13