Delivery Scope; Declaration Of Conformity; Intended Use; Tool Specifications - Würth MH 11-XE Traducción Del Manual De Instrucciones De Servicio Original

Delivery Scope

Demolition hammer, auxiliary handle.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our
accessories program.

Intended Use

The machine is intended for chiselling in concrete, brick, stone
and asphalt.
For damage caused by usage other than intended, the user is
responsible.

Tool Specifications

The tool specifications of the machine are listed in the table on
page 159.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries, these
values can vary.

Noise/Vibration Information

The measured values of the machine are listed in the table on
page 159.
Sound emission values determined according to
EN 60745-2-6.
Vibration total values a
h
determined according to EN 60745.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
(triax vector sum) and uncertainty K

Declaration of Conformity

We declare under our sole responsibility that the product
described under "Technical Data" is in conformity with all rel-
evant provisions of the directives 2011/65/EU,
2014/30/EU, 2006/42/EC, 2000/14/EC including their
amendments and complies with the following standards:
EN 60745-1, EN 60745-2-6.
2000/14/EC: Guaranteed sound power level 105 dB(A).
Conformity assessment procedure according to Annex VI.
Equipment category: 10
Notified body:
TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Technical file (2006/42/EC) at:
Adolf Würth GmbH & Co. KG, PFW,
Reinhold-Würth-Straße 12-17
74653 Künzelsau, Germany
Gerd Rössler
Managing Director
Würth International AG
Aspermontstrasse 1
CH-7000 Chur
20.05.2014
Patrick Kohler
Head of Power Tools/
Material Processing
12