Kohler K-12183 Guia De Instalacion página 4

Aerator
3. Installation Checkout
Ensure that all connections are tight.
Remove the aerator by turning it counterclockwise.
Turn on the main water supply and check for leaks. Repair as
needed.
Turn the faucet handle to the cold side and open to the "ON"
position. Run cold water through spout for about a minute to
remove any debris.
With water still running, rotate the faucet handle to the "HOT"
side. Continue running water through the spout for about one
minute and then turn off.
Remove any debris from aerator and reinstall.
1011034-2-B 4 Kohler Co.