Baldwin Prestige Serie Instrucciones De Instalación

1. Adjust and install latch
Measure your door backset as shown.
(25.4 mm)
1. Adjust and install latch
Measure your door backset as shown.
Ensure the latch is inserted
with the word "up" on top.
Ensure the latch is inserted
with the word "UP" on top.
Install latch with 11/16" screws.
Install latch with 11/16" screws.
TEMPLATE
TEMPLATE
1" (25.4 mm)
Diameter Diámetro
•
Prestige Series
Double Cylinder Deadbolt Installation Instructions
2-1/8"
(54 mm)
Single Cylinder Deadbolt Installation Instructions
1"
E
U R
A S
T
M E S E
C K
B A
E
U R
A S
T
M E S E
C K
B A
If backset of door measures 2 3/4" (70mm),
adjust latch by rotating face as shown.
If backset of door measures 2 3/4" (70mm),
adjust latch by rotating face as shown.
Note, for a 1-1/2" (38mm) diameter
hole, test if latch extends and retracts.
Note, for a 1-1/2" (38mm) diameter
Chisel out area if required.
hole, test if latch extends and retracts.
Chisel out area if required.
actual size
PLANTILLA
PLANTILLA
2-1/8" (54 mm)
Diameter
2. Install trim
Prestige Series
EXTERIOR
2. Install trim
EXTERIOR
Install exterior cylinder assembly.
Install exterior cylinder assembly.
INTERIOR
Install interior cylinder assembly.
INTERIOR
Install turnpiece.
3. Install strike
3. Install strike
Lifetime Warranty
This product comes with a lifetime mechanical and finish warranty to the
original residential user against defects in material and workmanship as
Lifetime Warranty
long as the original user occupies the residential premises upon which the
product was originally installed. This warranty DOES NOT COVER scratches;
This product comes with a lifetime mechanical and finish warranty to the
abrasions; deterioration due to the use of paints, solvents, or other chemicals;
original residential user against defects in material and workmanship as
abuse; misuse; or product(s) used in commercial applications. Upon return
long as the original user occupies the residential premises upon which the
of a defective product to Baldwin Hardware Corporation, Baldwin may repair
product was originally installed. This warranty DOES NOT COVER scratches;
or replace the product or refund the purchase price. Baldwin is not liable for
abrasions; deterioration due to the use of paints, solvents, or other chemicals;
incidental or consequential damages. Some states do not allow the exclusion
Diámetro
abuse; misuse; or product(s) used in commercial applications. Upon return
or limitation of incidental or consequential damages, so the above exclusion
•
of a defective product to Baldwin Hardware Corporation, Baldwin may repair
may not apply to you. This warranty gives you specific legal rights and you
may also have other rights that vary from state to state. If a mechanical or finish
or replace the product or refund the purchase price. Baldwin is not liable for
defect occurs, please call 1-877-315-7853 in the U.S. and Canada or return it
incidental or consequential damages. Some states do not allow the exclusion
to Baldwin Hardware Corporation, Consumer Services, 19701 Da Vinci, Lake
or limitation of incidental or consequential damages, so the above exclusion
Forest, California 92610.For customers outside of the U.S. and Canada, claims
may not apply to you. This warranty gives you specific legal rights and you
under this warranty must be made only to either the place of purchase or to the
may also have other rights that vary from state to state. If a mechanical or
listed importer.
finish defect occurs, please call 1-877-315-7853 in the U.S. and Canada or
return it to Baldwin Corporation, Consumer Services, 19701 Da Vinci, Lake
Forest, California 92610. For customers outside of the U.S. and Canada,
claims under this warranty must be made only to either the place of purchase
or to the listed importer.
24707 / 02
www.baldwinhardware.com
www.baldwinprestige.com
www.baldwinprestige.com
Not to be used on 1 1/2" holes.
Not to be used on 1 1/2" holes.
actual size
1/8" pilot holes may be required.
1/8" pilot holes may be required.
actual size