Scubapro White Tip Manual Del Usuario página 3

3. Apply a thin coat of silicone or other oil to the metal parts.
4. Store in a cool dry place away from moisture and direct sunlight.
5. For stainless knives, use a fine steel wool pad to remove any rust or staining
that may occur on metal parts.
6. Use extreme caution when handling your knife. The blades are extremely
sharp and can cause serious injury. This knife is not a toy. KEEP OUT OF
REACH OF CHILDREN.
BC HOSE ATTACHmENT
ASSEmBLy
The compact White Tip Knife can be attached to
any hose, most convenient for your diving style.
The enclosed hose attachment kit is easy to
assemble. See diagram.
Fit the curved black plastic retainer around the
hose. Place the stainless steel screws through the
retainer holes. Place the rubber friction pad in the
recess of the sheath and assemble.
Warning: Do not over-tighten the screws.
BC POCKET ATTACHmENT
ASSEmBLy
The White Tip can also be attached to your BC pocket using the enclosed rivets
and stainless steel nuts and screws. See the diagram below.
However, since it is necessary to make holes with gromets in the pocket fabric of
your BC, we suggest you contact your local Authorized Dealer service center, in
order not to risk damaging your BC by puncturing the inflatable bladder.
Distance between
centers of holes
97.80mm
Stainless steel screw
Sheath
BC Pocket Fabric
Gromet size #1
Retainer
Stainless steel locknut