Technical Data - GE 169233 Manual De Usuario

problEM
Creases are not
removed.
fabric setting
display (7) and
color-changing
indicator (13)
flash quickly.
fabrics are
scorched.
fabric setting
display (7) and
color-changing
indicator (13)
flash slowly.
If additional assistance is needed, please contact our Customer Assistance at
1.877.207.0923 (U.S.) or 1.877.556.0973 (Canada).
Rated voltage:
Rated power input:
Iron-169233-05 (GB).indd 14
TROUBLESHOOTING
CAusE
• The fabric setting is not
suitable.
• The spray function or the
steam burst function is
not used.
• The set temperature has
not been reached yet.
• The set temperature is
too high.
• Automatic shut-off
function has been
activated.

TECHNICAL dATA

AC 120 v~, 60Hz
1500W
soluTion
• Set the fabric setting
button (7) to the correct
temperature according to
the fabric label.
• Use the spray function or
the steam burst function
to remove stubborn
creases.
• Wait until the flashing
stops.
Set fabric setting button (7)
•
to correct temperature
according to fabric label;
wait for the fabric setting
display (7) and color-
changing indicator (13) to
stop flashing.
• Move the iron and allow it
to reheat.
14
1/11/10 9:59 AM