Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product Safety Information
Intended Use:
These Air Percussive Hammers are designed for hammering, punching, cutting, chipping and
scraping material through repetitive application of linear impacts of a tool steel that is retained
and driven by the Hammer.
For additional information refer to Air Percussive Tool Product Safety Information Manual
Form 04581450.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifi cations
Type of
Models
Handle
118MAX
Pistol Grip 2500
118MAXH
Pistol Grip 2500
122MAX
Pistol Grip 3500
122MAXH
Pistol Grip 3500
† K
= 3dB measurement uncertainty
pA
‡ K
= 3dB measurement uncertainty
wA
* K = Vibration measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air fi lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off , to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16576175 and table on page 2. Maintenance frequency is shown in a circular
arrow and defi ned as h=hours, d=days, and m=months of actual use. Items identifi ed as:
1. Air fi lter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, de-
greased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Offi ce or Distributor.
46816427_ed2
Stroke
Blows
Length
per
Minute
Inch (mm) † Pressure (L
3-1/2(89)
3-1/2(89)
2-5/8(67)
2-5/8(67)
Sound Level dB (A)
(ISO15744)
) ‡ Power (L
p
94.7
105.7
91.9
102.9
94.7
105.7
92.6
103.6
6.
Thread size
7.
Coupling
8.
Safety Air Fuse
9.
Oil
10. Oil - before starting, into air inlet
EN
2
Vibration (m/s
)
(ISO28927)
)
Level
*K
w
5.7
2.3
4.6
1.8
7.5
2.8
7.7
2.4
EN-1
Publicidad
Tabla de contenido
