Russell Hobbs 21170-56 Instrucciones página 67

diagrams
1 paper filter #4
(not supplied)
2 filter holder
15 The default keep warm time is 40 minutes.
16 To set the keep warm time:
a) Press and release the Z button till the ) icon blinks on the display.
b) Use the min button to set the keep warm time (up to 99 minutes).
c) After 5 seconds, ) will stop blinking, to show the time is set.
17 At the end of the time set:
d) The appliance will beep 16 times
e) i will disappear from the display.
f) ) will disappear from the display.
C COFFEE LATER
18 Press and release the g g button, to change the display and stop it flashing.
19 Set the clock to the correct time.
, It's a 24 hour clock.
20 Press and release the Z button.
21 T will show on the display.
22 Use the h and min buttons to set the correct hour and minute.
23 After 5 seconds, T will stop blinking, to show the temperature is set.
24 Set the timer to the time you want to start brewing.
25 Press and release the Z button again.
26 ( will show on the display.
27 Use the h and min buttons to set the correct hour and minute.
28 After 5 seconds, ( will stop blinking, to show the temperature is set.
29 The clock will retain its settings until the coffee maker is unplugged.
C LEAVE IT ALONE
30 That's it – leave it alone till the preset time comes round, and it makes your coffee – don't
fiddle with it, you might upset it.
C A QUICK CUP
31 You can remove the carafe at any time. To prevent the filter holder overflowing, replace the
carafe on the hotplate within about 20 seconds.
C CARE AND MAINTENANCE
32 Unplug the appliance and let it cool down before cleaning or storing away.
33 Tip the contents of the filter holder into the bin.
34 Press the lever at the rear of the carafe lid, above the handle, to open the carafe lid.
35 You may clean the carafe and filter holder in warm soapy water.
36 Clean the outside surfaces of the appliance with a damp cloth.
37 Don't put any part of the appliance in a dishwasher.
C DESCALING
38 Descale regularly. Use a proprietary brand of descaler suitable for use in plastic-bodied
products. Follow the instructions on the package of descaler.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
3 pin
4 grip
5 lid
6 reservoir
67
7 hotplate
8 carafe
9 press