Steelcase Bivi Instrucciones De Montaje página 13

®
For application using more than one (1) electrical trough
1.
Ensure all bench table frame components are attached using washers
and thumb nuts supplied.
2.
Up to (4) power strips (each with (4) receptacles) may be attached.
3.
Connect power strip #2 to power strip #3 (Orange to Orange).
Connect power strip #3 to power strip #4 (Green to Green). Feed
into the underside of the trough.
4.
Feed the hanging cords into the underside of the trough.
5.
Maximum cord length between power strips is 60 inches.
Distance between power strip mounting locations, in the
electrical trough, cannot exceed 60 inches.
5 5
2
5 5
Page 13 of 16
P/N 939500450
Doc # 75385 Rev F