Steelcase Bivi Instrucciones De Montaje página 9

®
1.
Insert the cord of power strip #1,
or single power strip, into the power
cutout in the trough that is closest to
the power outlet.
2.
Repeat step 1 with power strip
#2. The cords from each power strip
should be hanging to the floor.
3.
Install (2) washers and (2)
knobs, per power strip, inside the
trough and onto the bottom of the
power strip at each end.
4.
Feed the hanging cords into the
underside of the trough.
5.
Connect power strip #1 to power
strip #2 (Red to Red). Feed into the
underside of the trough.
6.
Insert the plug on power strip
#1 into the outlet in the wall.
1 2
3
4
5
Page 9 of 16
P/N 939500450
Doc # 75385 Rev F