If you want to upload data to your customised website,
select the Enable button (display blue) and select the
protocol type. The website should have the same protocol
with Wunderground or Ecowitt. Input all the information
needed. Press Save.
4.2.2.2. IOS USER
Activate the application you have downloaded on your
mobile device. The main screen will indicate your station is
offline (because it is not yet connected to WiFi).
Configure Device
Note: If you own a dual band router (2.4 GHz and 5.0
GHz),make sure you connect to the 2.4 GHz band, otherwise
EN
it will fail to connect the weather station to WiFi.
1)
Tap on the settings icon and select "Configure a New
Device".
2)
Select the device you have from the device list, then
press Next.
3)
Operate as per the information, tick the box to
confirm "completed operation", press Next.
30
4)
Press Sync and select your WiFi network from the
WLAN list, then enter your WiFi password and press
Next.
Select desired WiFi network and return to WS View App.
5)
Press button "Select WiFi" to go to WiFi Setting.
31
EN