Listening To Music - Steren POD-150 Manual Del Usuario

CHARGING THE IPOD'S BATTERY
If you want to charge the iPod's battery, follow these steps:
1.- Plug the USB / Firewire cable into an available port in the
computer, the extreme connector, plug it into the base.
2.- The indicator LED in the base will light on.
3.- Place an iPod adapter into the base, in accord to your iPod
model.
4.- Place the iPod into the Dock connector.
5.- Now, the iPod will be synchronized with iTunes and the
message Do not disconnect displays in the screen. The charging
process begins.
6.- While the battery is charging, a battery icon displays in the
iPod's screen . When the battery is fully charged, the icon
will change to In this moment you can disconnect the iPod
from the base.
Firstly, remove the equipment using the software, then click Firstly, remove the equipment using the software, then click
on the left button of the mouse over the icon "Remove on the left button of the mouse over the icon "Remove
hardware securely", located on task bar, and choose the hardware securely", located on task bar, and choose the
device. Once the system displays that you can remove device. Once the system displays that you can remove
hardware securely, unplug it from the USB / Firewire port. hardware securely, unplug it from the USB / Firewire port.

LISTENING TO MUSIC

Use the base to listen to your favourite music, using external
speakers or headphones.
1.- Place the base in a fl at surface.
2.- Find an iPod adapter, in accord to your iPod mode.
3.- Plug an earphone into the Line OUT connector.
4.- Place the iPod into the Dock connector. The indicator LED
will light in green.
5.- Select the desired songs, as the normal way you do.
6.- While listening to music, use the remote control to set the
volume level and select previous or next songs.
7.- Turn the device off and release from the base after their use.
In this mode, the battery will be not charged. In this mode, the battery will be not charged.
ENGLISH-4