How to erase programmed codes
If you want to erase a specific code, you can use the quick program method
or the automatic search method; when you enter the new code, automatically
will erase the old code.
How to find out which code is
Once you have set your remote control and control your device, you can blink
back your setup code for future reference, even if you used the Automatic
Search Method or the Quick Program Method.
In order to know a specific device code:
1.- Press the button of the programmed device (TV, DVD, etc.).
2.- To know the first digit, press SET and then press number 1 key. Count the
red blinks on the indicating LED. If there are no blinks, the digit is "0".
3.- For the second digit, press SET and then press number 2 key. Count the
red blinks.
4.- For the third digit, press SET and then press number 3 key. Count the
red blinks.
How to switch between devices
Just press the button of the desired device that you want to use (TV, VCR,
Sat, CD, VCD, DVD, Cable, Aux)
currently programmed
11 11