Operation; Ups Start-Up - ABB PowerValue 11 RT Guía Rápida

Operation

You can operate the UPS through the user-friendly display (see chapter 4 of the user
manual for a full list of possible operations).
Power on/off
Scroll up

UPS start-up

To start up the UPS with mains supply:
1. Check that all cables are connected correctly and well-fixed mechanically.
2. Connect the UPS to the power supply.
3. Keep the power-on button pressed for longer than 1 second. The alarm buzzer
will sound for 1 second and the UPS will start up.
4. After a few seconds, the UPS goes to online-mode. If the mains power is
abnormal, the UPS will transfer to battery-mode without interruption in the output
of the UPS.
Select / Edit
Scroll down
Quick guide | PowerValue 11 RT 1-3 kVA 17
1 e n