About Condensation (Fogging of the Lens)
∫
• Condensation occurs when there are differences in
temperature and humidity as described below.
Condensation can cause the lens to become dirty and
lead to mold and malfunctioning, so exercise caution in the
following situations:
– When the camera is brought indoors from outside during
cold weather
– When the camera is brought into an air-conditioned car
– When cold air from an air conditioner is directly blown
onto the lens
– In humid places
• If condensation occurs, turn the power off and leave it for
about two hours. Once the camera acclimatizes to the
surrounding temperature the condensation will go away
naturally.
Supplied Accessories
Product numbers correct as of January 2016. These may
be subject to change.
1
2
SFC0360
1ZE4Z233CXZ
5
2GE8Z233CXZ
1
Lens Pouch
2
Lens Hood
3
Lens Cap
4
Lens Rear Cap
5
External tripod mount
• The lens rear cap and lens cap are attached to the
interchangeable lens at the time of purchase.
3
4
1GE2Z233CXZ
VFC4605
(ENG) SQT1199
5