Klarstein 10029241 Manual De Instrucciones página 37

Adjusting the bracket position
1. The unit should be placed on a stable, smooth surface (use the packaging). Do
not apply force onto the controls protruding from the hob.
2. Fix the hob on the work surface by screw 4 brackets on the bottom case of
hob (see picture) after installation.
3. Adjust the brackets to the thickness of the work surface.
A
Screw
Hob
Bracket
B C
Bracket Screw hole
Table Hob
Bracket
D
Bottom case
Table
EN
37