Sony PROFORMAWM60 Guia De Instalacion página 8

Installation
STEP 4:
Attach TV harness to television
A. Locate the top pair of "VESA" mount screw
holes on the back of the television.
B. The TV harness (B) includes a pair of
mounting bars connected by a cable. The
mounting bars have holes indicated at 200, 300,
400, 500 and 600 mm spacing. Line up the bars
with the "VESA" mount screw holes that match.
C. Your Wall Mount is supplied with several sets
of machine screws (E, F, G, H, I, J, K, L and M).
These cover a range of diameters and lengths.
Consult your TV's operating instructions to find
screws of the right size and depth to fit your
television. Pair these screws with the supplied
washers of the appropriate size. (Screws E, F
and G use washers N. Screws H, I, J, K, L and M
use washers O.)
D. With the numbers on the mounting bars
facing you, use a Phillips screwdriver to attach
the TV harness to the television.
STEPS 4 & 5
8
(CONTINUED)
STEP 4:
(continued)
CAUTION! Do NOT use a power drill to attach
the mounting bars to the television.
CAUTION! If the screws are too loose, the
TV may fall and cause injury or property
damage. If they are over-tightened, they may
break and cause injury or property damage.
STEP 5:
Attach spacers or self-adhesive pads
A. If you want the television to sit parallel to the
wall, install the spacers (C) with the supplied
machine screws. Your Wall Mount is supplied
with several sets of machine screws (parts E,
F , G, H, I, J, K, L and M). These cover in a range
of diameters and lengths. Consult your TV's
operating instructions to find screws of the
right size and depth to fit your television. Pair
these screws with the supplied washers of the
appropriate size. (Screws E, F and G use washers
N. Screws H, I, J, K, L and M use washers O.)
8mm – 12mm
✓
CAUTION! Excessively long
screws can damage the
television housing, causing
injury or property damage.
Check your TV owner's manual
for proper screw depth.
BACK OF TV
✗