Function Introduction - Electrolux EAWE09E2CJW Manual De Instrucciones

31 electrolux installation
Remove
Before removing air conditioner to the other place, you should contact the
seller firstly.
Then it must be done under the direction of the professional technician. In
addition, the charge of this must be paid.
Noise
• Install in a location where is firm enough to avoid the enlargement of noise
and vibration.
• Don't put anything in front of the outlet of outdoor unit to avoid increasing
noise.
• Be sure that hot air or noise will not inconvenience neighbors.
• Please contact the seller as soon as there is strange noise during
operation.
• Please use the safety support.
Electric wiring
• Must connect with ground reliably.
• The exclusive circuit must be used. But removable socket can't be used
because poor contact of it can cause over heat or fire.
• Don't pull the power cord strongly.
• In fixed circuit, there must be electricity leakage protection switch and
leakage current is less than 30mA.
• Air switch (thermal-magnetic breaker) should be installed in the circuit and
its capacity is 10A(WRCAR081R), 16A(WRCAR121R, WRCAR123R),
20A(WRCAR183R), 25A(WRCAR243R).
• The fixed wiring should be more than 2.5mm² in area.
All manuals and user guides at all-guides.com

Function introduction

Window type room air conditioners can regulate the room temperature and dry
the room. It is convenient for your work,study and life. It can be widely used in
residence, shop, hotel, office, library and laboratory, and so on.
Cooling in summer
In hot summer, Air conditioner can cool down the room air by transferring heat
out.
Dehumidifying in rainy or humid season
Air conditioner can dehumidify and make the room air dry and comfortable.
Exchange fresh air
Open storm door to keep the fresh air in the room.
Always wait at least 3 minutes before switching the air conditioner on again
after you have switched it off during cooling.
function introduction electrolux 32