Installer Instructions; First Installation; Positioning In The Work Top - Foster 4000 Manual De Instrucciones

5.

First installation

Do not leave packaging material waste unguarded in the household environment.
Separate the various packaging waste materials and deliver them to the
closest selective waste collection centres.
In order to remove all manufacturing residues, we recommend cleaning the appliance.
For further information on cleaning see Chapter 15
6.

Positioning in the work top

This built-in cooker hob is of Class 3.
The following interventions require masonry and/or carpentry work and must there-
fore be completed by a competent technician. Installation can be completed on dif-
ferent materials, such as masonry, metal, solid wood and plastic laminated wood, as
long as it is heat resistant (T 100°C).
6.1 Installation on the support structure (worktop) of a traditional built-in
cooker hob (8 mm edge, Q4 edge, semi-flush edge)
Cut an opening on the top surface of the
cabinet with the dimensions and position
indicated here below and represented in
the drawing [
The dimensions of the built-in hole are
shown in the Gas cooker hobs sum-
mary - models with traditional built-
in [
Page 213
drawing of the purchased cooker hob.
].
Fig. 2
], in correspondence of the

INSTALLER INSTRUCTIONS

[ .
Page 38]
Fig. 2: cutting the hole for the built-in
25