Discharging Combustion Products (Exhaust); Adapting To Different Types Of Gasses - Foster 4000 Manual De Instrucciones

INSTALLER INSTRUCTIONS
10. Discharging combustion products
(exhaust)
This appliance is not connected to a combustion-byproduct evacuation system. It
must be installed in accordance with the existent regulations. Please pay particular
attention to the regulations concerning ventilation.
Discharge of combustion products must be ensured through hoods connected to an
efficient natural draught flue, or through a forced exhaust.
An efficient exhaust system requires an accurate design by a specialist that is ap-
proved for this work, following positions and distances contained in regulations.
IMPORTANT: At the end of the intervention the installer must issue a conformity
certificate.

11. Adapting to different types of gasses

Burner
Gas
type
Series No.
2
3
4
II
5
10
6
7
III
8
9
11
12
AE
13
14
32
Nominal
power
Ref.
(KW)
Auxiliary 1,00
Semi-quick 1,75
Quick 2,70
Triple crown 3,50
Dual 4,50
Auxiliary 1,10
Semi-quick 1,75
Quick 3,00
Triple crown 3,80
Auxiliary 1,00
Semi-quick 1,75
Quick 3,00
Dual gear 5,00
INSTALLER INSTRUCTIONS
Rated con- Injector
sumption
(g/h) (ø mm)
73 0,50
127 0,65
196 0,80
254 0,95
328 i 0.46 / and 0.66 i 0,30 / and 1,40
80 0,52
127 0,65
218 0,85
276 0,98
73 0,50
127 0,65
218 0,85
364 i 0.46 / and 0.95 i 0,40 / and 1,70
Min. nominal
power
(KW)
0,52
0,52
0,90
1,80
0,52
0,52
0,90
1,80
0,52
0,52
0,90