Descargar Imprimir esta página

Taurus TROPICANO 3C CERAMIC Manual página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Ensure that this product is not used by the
disabled, children or people unused to its
handling.
- This appliance should be stored out of
reach of children and/or the disabled.
- Make sure that the fan grill on the
appliance is not blocked by dust, dirt or
other foreign objects.
- Turn the thermostat control to the
minimum (MIN) setting. This does not mean
that the iron is switched off permanently.
- Any misuse or failure to follow the
instructions for use renders the guarantee
and the manufacturer's liability null and
void.
Instructions for use
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Start the appliance, press the speed/
power button.
- Turn the thermostat control to the desired
temperature position.
Fan function:
- Select the fan position.
- Select the desired ventilation speed.
- Check that the thermostat button is set to
maximum.
Heater function:
- Select the heater position.
- Select the desired heating power.
- Check that the thermostat control is set to
the temperature required
Manual Tropicano 3C Ceramic.indd12 12
Manual Tropicano 3C Ceramic.indd12 12
Once you have finished using the
appliance:
- Select the minimum position (MIN) using
the speed control.
- Stop the appliance, selecting position 0 on
the power selector control.
- Unplug the appliance from the mains.
Asa de Transporte:
- This appliance has a handle on the
upper part of the body, which facilitates
comfortable transportation.
Safety trip switch:
- The appliance has a safety trip switch that
protects the appliance from overheating.
- When the appliance switches itself on and
off repeatedly, for reasons other than the
thermostat control, check to ensure that
there are no obstacles that impede correct
air entry or expulsion.
- If the appliance turns itself off and does
not switch itself on again, disconnect
it from the mains supply, and wait
for approximately 15 minutes before
reconnecting. If the machine does not start
again seek authorised technical assistance.
Cleaning
- Disconnect the appliance from the mains
and allow it to cool before undertaking any
cleaning task.
- Clean the equipment with a damp cloth
with a few drops of washing-up liquid and
then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
12.04.07 11:41:29
12.04.07 11:41:29

Publicidad

loading