Troubleshooting - Formula 1 BC710 Manual De Uso Original

Trouble shooting
Error/Problem
Display shows (1) „---".
Display (1) shows „Er1".
Display shows (1) „Er2".
Display (1) shows „Er3".
"Error" LED (11) lit
Battery cannot be charged
Long charging time
Battery voltage too low
Possible cause
No battery connected.
Battery voltage below 0.5 V.
Connected battery incompatible.
Connected battery defective.
The battery was not fully charged
within 24 hours.
Battery incorrectly/not connected
Incorrect battery voltage (6/12 V)
selected
No power supply, charger not plugged
in.
Only a very low charging current is used
very low temperatures (below 0°C).
in
This will extend the charging time. As
the battery warms up, the charging
current is adjusted accordingly.
Battery capacity too high for the char-
ger being used.
Battery wasn't charged long enough.
Solution
Connect battery (see "Connecting the
Device"). Unable to charge battery.
Only connected compatible batteries
(see "Intended Use").
Dispose of battery in an environmen-
tally-friendly manner.
Verify the charging rate is set correctly.
Battery defective. Dispose of battery in
an environmentally-friendly manner.
Unplug charger and check the connec-
tions.
Unplug charger and wait for the LEDs
to go out. Reconnect the charger and
select the correct battery voltage.
Verify the charger is connected to a
230 V mains socket. Battery may be
defective.
Charge battery in normal conditions.
Explosion hazard!
Never charge frozen batteries.
Use a suitable charger.
Ensure the battery is charged long
enough.
Battery Charger BC710, BC715
EN
19