Product Overview - Hach TitraLab KF1000 Serie Manual Básico Del Usuario

and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to
correct the interference at their expense. The following techniques can be used to reduce
interference problems:
1. Disconnect the equipment from its power source to verify that it is or is not the source of the
interference.
2. If the equipment is connected to the same outlet as the device experiencing interference, connect
the equipment to a different outlet.
3. Move the equipment away from the device receiving the interference.
4. Reposition the receiving antenna for the device receiving the interference.
5. Try combinations of the above.

Product overview

The instrument operates with digital and analog sensors. Measurement applications are installed on
the instrument to automate the measurement process. Instructions show on the display when user
intervention is required.
1 Keypad
2 Display
1
3 USB port
4 Sample stopper
5 Beaker
Model
KF1121
1
A second USB port is found on the rear of the instrument, but the instrument recognizes only
one USB storage device connection at a time.
6 Syringe protection cover
7 Syringe input/output
8 Tube clips
9 Syringe
10 Sensor holder
Table 1 Instrument configuration
Syringes
1
11 Pump 2 input/output (waste)
12 Pump 1 input/output (solvent)
13 Pump access cover
Pumps
2
English 5