Assembly - Skil PS4563B-00 Manual Del Propietário

ASSEMBLY

WARNING
parts, making adjustments, cleaning, or when not in use .
WARNING
could result in serious personal injury.
WARNING
is misuse and could result in a hazardous condition leading to possible serious injury.
Unpacking
This product requires assembly.
•
Carefully remove the product and any accessories from the box. Make sure that all items
•
listed on the box are included.
Inspect the tool carefully to make sure that no breakage or damage occurred during shipping.
•
Do not discard the packing material until you have carefully inspected and satisfactorily
•
operated the tool.
If any parts are damaged or missing, please return the product to the place of purchase.
•
Connecting the Poles
Attaching Without the Extension Pole (Fig . 2a)
1. Remove the battery pack.
2. Align the rib on the front pole with the arrow
slot on the rear pole and push the front
pole into the rear pole.
3. Rotate the threaded sleeve, according to
the rotation direction marked on it, to fasten
it onto the threaded connector securely.
4. Pull on the front pole to verify that it is
securely locked in place.
Attaching the Extension Pole (Fig . 2b)
The extension pole extends the cutting range.
It should be connected between the front pole
and the rear pole.
Follow the previous instructions to connect the
front pole to one end of the extension pole, and then connect the rear pole to the other end of
the extension pole the same way.
NOTICE: Do not use the screw sleeve as handles during operation. Only hold the screw
sleeve during transportation.
WARNING
Fig. 2b
Front Pole
12
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling
If any parts are damaged or missing, do not operate this product until
the parts are replaced . Use of this product with damaged or missing parts
Do not attempt to modify this tool or create accessories not
recommended for use with this tool . Any such alteration or modification
Be certain that the threaded sleeves are fully tightened before operating the tool.
Check it periodically for tightness during use to avoid serious personal injury.
Fig. 2a
Front Pole
Rotation
Direction Mark
Threaded
Sleeve
Extension Pole
Arrow Mark
Arrow
Slot
Rib Threaded
Connector
Rear Pole
Rear
Pole
Screw
sleeve