Beninca RR.4WBP Manual Del Usuario página 9

Menu to erase previously typed in transmitter codes from memory.
The single submenus are described hereunder:
The receiver is in a waiting mode, waiting for a memorized transmitter key to be pressed.
code
The transmitter is erased from the receiver memory.
DEL
Remove a control unit code for which the position in memory is know, see function
indh
FIND>>Code.
It erases the key code from memory to gain access to all functions of the radio menu.
key
The receiver memory is completely erased. All transmitter codes and relevant associations and channel
parameters are cancelled.
res
A confirmation of the operation is being asked.
Search Menu for transmitter codes stored in memory.
The single submenus are described hereunder:
The receiver is waiting for a code. Press any key on the transmitter; if this is stored its position
find
Code
in memory is displayed.
N Tx The number of transmitter codes stored in the receiver memory is displayed.
9