Dell Force10 S25N Guia De Inicio Rapido página 20

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Configure a Host Name
The host name appears in the prompt. The default host name is Force10.
Host names must start with a letter and end with a letter or digit.
Characters within the string can be letters, digits, and hyphens.
Task
Create a new host name.
Access the System Remotely
You can configure the system to access it remotely by Telnet.
The S25N, S25V, and S25P systems do not have a dedicated management port,
nor a separate management routing able. Configure any port on one of the
chassis to be the port through which you manage the system and configure an IP
route to that gateway.
Step Task
Configure an IP address for the
1
port through which you will
manage the system.
Configure an IP route with a
2
default gateway.
Configure a username and
3
password.
Configure the Management Port IP Address
Assign IP addresses to the management ports in order to access the system
remotely.
NOTE: Assign different IP addresses to each RPM's management port.
18
Installing the Software
Command Syntax
hostname name
Command Syntax
ip address
ip route
username
Command Mode
CONFIGURATION
Command Mode
INTERFACE
CONFIGURATION
CONFIGURATION

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

S25vS25p

Tabla de contenido