Technical Data; Declaration Of Conformity - Bosch GGS Professional 6 Manual Del Usuario

OBJ_BUCH-1050-002.book Page 21 Tuesday, November 2, 2010 3:50 PM

Technical Data

Straight grinder
Article number
Rated power input
Output power
Rated speed
Thread of grinder spindle
Max. spindle length
Tool holder
Spindle collar dia.
Grinding tool diameter, max.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, Postfach 10 01 56,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
23.09.2010
Bosch Power Tools
GGS 6
Professional
0 601 214 0..
W 1200
W 720
-1
min 6800
M 14
mm 31
mm 20
mm 43
mm 125
kg 3.9
/II
Assembly
Before any work on the machine itself, pull
the mains plug.
Mounting the Protective Devices
Adjust protection guards in such a manner
that sparking toward the operator is pre-
vented.
Protection Guard for Grinding (GGS 6 S)
(see figure A)
Place the protection guard 2 on the spindle col-
lar. Adapt the position of the protection guard 2
to the requirements of the work step. Lock the
protection guard 2 with locking screw 14 and
tighten the locking screw with at least 10 Nm.
1 609 929 S82 | (2.11.10)
English | 21
GGS 6 S
Professional
0 601 214 1..
1150
670
6800
M 14
31
20
43
125
3.9
/II