Powering On; Printing - Pandigital ZINK PANPRINT01 Guia Del Usuario

For optimal performance, load only 10 sheets at a time, and always use the Smartsheet
the bottom of each 10-sheet pile.
3. Push the paper tray into the paper tray slot in the printer until it clicks firmly into place.

Powering on

To power the printer on, press the Power button
This screen will appear when the printer is ready.
Note: When you load a new stack of ZINK Paper
power on, the printer will automatically feed the Smartsheet
cleans the printer. However, if the printer is already powered on when you load a
new stack of ZINK Paper
print a photo.

Printing

There are four available methods for printing, as follows:
• From a PictBridge-compatible camera (see "Printing from a PictBridge-compatible Camera"
on page 11).
• From a memory card (see "Printing from a Memory Card or USB Thumb Drive" on page 11).
• From a USB thumb drive (see "Printing from a Memory Card or USB Thumb Drive" on
page 11).
• From a computer (see "Print from a Windows Computer" on page 13).
WARNING: Never force or pull a sheet of ZINK Paper
jammed.
To clear, try the following:
a) press and hold the Power button until the printer feeds the sheet through
b) unplug the power cord & plug back in
c) print another photo.
Failure to follow these instructions may result in permanent damage to the printer.
WARNING: Never remove the printer's power plug while 'Printing...' or 'Processing...'. If you
want to cancel out of either of these states, press and hold the Power button
the printer cancels the process, and then wait until it finishes before unplugging the
power cord. Failure to follow this instruction may result in permanent damage to the
printer.
10
All manuals and user guides at all-guides.com
ENTER
® ®
and Smartsheet , the Smartsheet
.
® ®
with the Smartsheet , and then
®
which calibrates &
®
will not feed until you
®
out of the printer if it is stuck or
®
at
until