Plugging In; Loading Zink Paper - Pandigital ZINK PANPRINT01 Guia Del Usuario

Left side

Plugging in

Plug the power supply into the DC-in connector on the printer, and plug the other end of the power
supply into an available power socket (100-240v, 50~60 Hz 1.2A max).

Loading ZINK Paper

Use only Pandigital ZINK Paper
more Pandigital ZINK Paper
CAUTION: Be careful when handling the ZINK Paper
printable surface will reduce the print quality. Hold the paper carefully along the edges
when loading the paper tray.
Note: Always store the ZINK Paper
into the printer.
1. Squeeze tabs on each side of the ZINK paper tray to open the lid.
Note: Each pack of ZINK Paper
bottom of the stack when inserting a new pack of ZINK Paper
2. Insert the Smartsheet
blank white side facing up on the top, and then close the lid.
All manuals and user guides at all-guides.com
ZINK Paper
TO PC 28V-DC
®
®
. Do not use any other brands of ZINK paper. You can purchase
®
from local retailers or from our website: http://www.pandigital.net.
®
completely flat. If the paper edges are curled it may not feed
Press to open
Insert This side up
Press to open
®
includes a Smartsheet
®
with printing down on the bottom, and the ZINK Paper
®
out slot
®
, as finger prints or moisture on the
®
that MUST be inserted at the
®
into the tray.
®
with the
9