Steren AMP-025SD Manual De Instrucciones página 21

Installation
To ensure proper operation and prevent damage to your equipment, place
the unit on a firm flat surface. When you use the unit on a shelf, make sure it
can support the amplifier's weight.
Make sure your equipment has adequate ventilation, both top and bottom. If
the amplifier is installed in a cabinet or other enclosed area, make sure there
is enough air circulation inside the cabinet.
Avoid placement in areas too hot or cold, or in places where it is exposed to
direct sunlight or heat generating equipment.
Avoid wet areas
Do not block ventilation openings or place objects directly over them.
Remember, power amplifiers generate heat, heat sinks and ventilation slots
that are part of the cabinet are specially designed to remove it.
Placing other electronic equipment near these heat dissipation systems may
affect the amplifier's performance.
Cleaning
Clean the unit with a soft, dry cloth. If necessary, use a cloth slightly
dampened with soapy water and dry immediately. Do not use
abrasive cleaners as them can damage the metal parts' finish. Avoid spraying
insecticide near the unit.
5