Troubleshooting Guide - Worx WA3732 Manual Del Usuario

MAINTENANCE
TROUBLESHOOTING GUIDE – Problems
and Solutions
Possible
Problem
Cause
Battery is
not inserted
into the
charger
Green ON,
properly
but battery
does not
charge Battery
when contacts
inserted are not
into the connecting
charger properly
Defective
Battery
Battery
charger
plug is not
properly
connected
to power
No light
supply
(Neither
the red or
Electrical
green light
outlet,
illuminates)
battery
charger
cable, or
battery
charger is
defective
1. I CANNOT FIT THE BATTERY INTO THE
BATTERY CHARGER. WHY?
1) Check if the charger and the battery pack
are specifically designed for working
together.
2. REASONS FOR DIFFERENT CHARGING
TIMES
The charging time can be affected by many
reasons which are not defects in your product.
1) If the battery pack is only partly discharged
Battery Charger
Solution
Slide the battery
into the charger
properly
Remove any
debris from the
battery contacts
(try inserting and
removing the
battery several
times) or replace
the battery
Replace the
battery
Insert the main
plug of battery
charger fully into
the electrical
outlet
Check the
voltage; have the
battery charger
checked by our
service agent
or a similarly
qualified person
it may be re-charged in less than 3 hours.
2) If the battery pack and ambient
temperature are very cold then re-charging
may take more hours.
3) If the battery pack is very hot you must
remove your battery pack from the charger
and allow your battery pack to cool first to
ambient temperature and then recharging
can be started.
NOTE: The charging time can be affected by
many reasons which do not indicate defects in
your product.
Remove the plug from the electrical
socket before carrying out any
adjustment, servicing or maintenance.
Your tool requires no additional lubrication
or maintenance. Never use water or chemical
cleaners to clean your tool. Wipe clean with
a dry cloth. Always store your tool in a dry
place.
7
EN