ProctorSilex Commercial 78522 Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PLEASE NOTE: This Grinder features an all-hardened steel gear
transmission. This causes the Grinder to operate at a higher volume and
temperature than other Grinders. This is normal and will not affect the
Grinder's performance.
GRINDING TIPS
DO NOT overtighten the Front Ring Nut. It should be firmly tight.
Make sure the Grinding Knife blades lay flat on the Grinder Plate.
DO NOT operate the Grinder without meat in the Head. Running the
Grinder while dry could damage the Head and Auger.
ALWAYS lubricate the Head, Grinding Plate, and Grinding Knife with a
food-grade silicone spray after cleaning.
w WARNING
during operation, follow these steps to restore normal output:
Turn the Grinder "OFF" (O) and disconnect the Power Cord from the
electrical outlet.
Remove the Front Ring Nut and Grinding Plate.
Thoroughly clean the Grinding Plate. Make sure all of the holes are clear.
Reinstall the Grinding Plate and Front Ring Nut.
Reconnect the Grinder to the electrical outlet.
Continue with grinding.
Repeat as necessary.
10
Cut Hazard. If the Grinder Plate becomes jammed/clogged

Publicidad

Tabla de contenido
loading

Tabla de contenido