Siefken SD4210 Instrucciones De Uso página 27

Built to Exceed 3 YEARS
L I M I T E D WA R R A N T Y
3. Maintenance of the motor
The motor is the heart of the machine, please avoid any damage to the winding, or any water and
oil to wet it.
4. Inspecting the carbon brushes
The Motor employs carbon brushes which are consumable parts. When they become worn to or
near the "wear limit", it could result in motor trouble. The red service indicator LED lights up when
the carbon brushes are worn out to indicate that the tool needs servicing. The power tool must
then be sent to an after-sales service agent.
When you have to replacement the carbon brushes by yourself, please following the order ：
(1) Loosen the three set screws and remove the fan cover.
(2) Remove the helical spring and carbon brushes.
(3) After replacing the carbon brushes, install the helical spring and fan cover, with securely tighte-
ning three set screws.
5. Cleaning
Clean the machine regularly with a soft cloth, preferably after each use. Solvent such as gasoline,
thinner, alcohol etc.. These kind of chemical materials are not allowed to use, water or soap are
recommended!
6. Protecting the Environment
Do not dispose of power tools together with household waste material!
The machine, accessories and packaging should be sorted for environmental friendly recycling.
In observance of European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric tools that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
CAUTION:
Repair, modi cation and inspection of Elite Power tools must be must be carried out by a Elite
Authorized Service Center.
In the operation and maintenance of power tools, the safety regulations and standards prescribed
in each country must be observed.MODIFICATIONS:
Elite Power Tools are constantly being improved and modi ed to incorporate the latest technologi-
cal advancements. Accordingly, some parts (i.e. code numbers and/or design) may be changed
without prior notice.
NOTE:
Due Elite's continuing program of research and development, the speci cations herein are subject
to change without prior notice.
11