Kohler K-856-V Diagrama De Instalación página 2

18"
(457 mm)
11" (279 mm)
2-1/2"
(64 mm)
3" (76 mm)
Product Information
Applicable product:
Bath whirlpool with spa/massage package
Fixture*:
Bathing well:
Basin area bottom 42" (1067 mm) x 25" (635 mm)
Basin area top 58" (1473 mm) x 29" (737 mm)
Weight 510 lbs (231.3 kg)
To overflow:
Water depth 18" (457 mm)
Capacity 96 gal (363.4 L)
* Approximate measurements for comparison only.
Drop-in cut-out 65-1/2" (1664 mm) x 35-1/2" (902 mm)
Max
V
Pump 240
Required accessories:
Grip rails (pair)
1023268-1-C
66" (1676 mm)
1/2" (13 mm)
2-7/8" (73 mm)
K-856-V
Hz A
50/60 15
K-9653
No change in measurements with drain
shown. (K-7148-AF or K-7148M-AF)
NOTE: Pump/piping protrudes beyond rim.
2" (51 mm) Max
Pump/Control Access
34" (864 mm) W x
15" (381 mm) H Min
3/4" (19 mm)
23"
(584 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control:
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 81
lbs/square foot (395 kg/square meter) loading.
Cast Iron whirlpools are extremely heavy, making some drop-in
installations difficult. Splitting the deck/surround is recommended
if installing into a deck.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
2
36" (914 mm)
1-1/2" OD
220-240 V, 20 A, 50/60 Hz
Kohler Co.