About These Installation Instructions; Safety Information - Schluter BEKOTEC THERM FRS Manual De Instrucciones

GB

1. About these installation instructions

1.1 About these installation instructions
These installation instructions describe the fixed-value control station Schlüter-BEKOTEC-THERM-FRS. The instructions are part of the product.
• Do not use the product until you have fully read and understood these installation instructions.
• Make sure that the installation instructions are available at all times for work to be performed at and with the product.
• Hand these installation instructions and all documents associated with the product over to the product owner.
• If you find errors, contradictions or unclear points in the installation instructions, please contact the manufacturer prior to using the product.
These installation instructions are subject to copyright protection and may only be used to the extent permitted by law. All changes reserved. The manu-
facturer disclaims all liability or warranties for damages or consequential damages resulting from failure to follow these installation instructions and failure
to comply with the regulations and standards applicable at the location where the product is installed.

2. Safety information

2.1 Warnings and hazard classes
These installation instructions contain warnings to alert you to potential hazards and risks. In addition to the instructions provided in this document, you are
required to comply with all regulations, standards and safety guidelines in effect at the location where the product is installed. Verify that you are familiar with
all regulations, standards and safety guidelines prior to using the product, and ensure that they are followed. The warnings in these installation instructions are
labelled with warning icons and signal words. The warnings are divided into hazard classes, depending on the severity of the hazard situation.
DANGER points out an immediate hazard situation. If the danger is not avoided, it will cause death or serious injuries.
WARNING points out a potentially hazardous situation. If the warning is not heeded, it can cause death, serious injuries or material damage.
CAUTION points out a potentially hazardous situation that may cause material damage if not heeded.
In addition, these installation instructions use the following icons:
This is the general warning icon. It indicates a risk of injury and material damage. Follow all instructions provided in conjunction with this
warning icon to avoid deadly accidents, injuries and material damage.
This icon points out hazardous electric voltage. This icon in a warning refers to the risk of an electric shock.
20 20
About these installation instructions / Safety information
DANGER
WARNING
CAUTION