Medion LIFE X14330 Guía Rápida página 95

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 100
SIGNAL QUALITY
SIGNAL LEVEL
 Under
CHANNEL SCAN
 Under
DVBS SCAN CONFIGURE
Select the following options:
SCAN MODE
CHANNELS
 Press
or  to start the search
OK
 If you do not want to set up any TV channels, select
 Once the search is complete, confirm
 Then accept or skip the information on manufacturer use and diagnosis for transferring your
user data to the device manufacturer. This enables the manufacturer to ensure optimally func-
tionality of the device.
Setup is now complete and the device switches to Internet mode automatically. Press the
button to switch back to TV mode.
The TV can be reconfigured at any time. To do so, use the
TINGS > DEVICE PREFERENCES
14
Satellite Setup
The signal quality is shown in per cent. Settings here cannot be
changed.
The signal strength is shown in per cent. Settings here cannot be
changed.
, select
and press
SCAN
, you can specify the
: A full search will be run on the selected satellite. This will
COMPLETE
also take into account new transponders that have not been added
to the transponders list. Two searches are performed during a com-
plete search. The first search identifies the satellite's transponders.
The second search locates the channels. The complete search takes
the longest.
: Activate/deactivate the network scan.
NETWORK
Decide which channels you want to search for:
ONLY ENCRYPTED CHANNELS
encrypted channels).
FINISH
menu.
or .
OK
and the
SCAN MODE
(encrypted channels) or
and press the
SCIP SCAN
with
.
OK
to search.
CHANNELS
(free channels),
FREE
(free and
ALL
or  button.
OK
EXIT
option in the
RESET
or
SET

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Life x15031Life x15532Md 32300Md 32301Md 32302

Tabla de contenido