3. Empty the dust container (11) into the dustbin. Alternatively with small amounts of
dirt you can lift up the front flap (18) for emptying.
4. Remove the dust in the filter (12) either by shaking or by rinsing with warm water.
Before you use the vacuum cleaner the next time you must make sure that the filter
is dry.
5. Clean the rubber ring (c).
6. Push the inner part (b) with the filter (12) back in the dust container (11); make sure
that it is inserted properly.
7. Insert the dust container (11) back in the handheld vacuum cleaner (4) until it locks
in place.
BEEM – Elements of Lifestyle
25 / 72