Instructions For Safe Use - Oce TDS700 Manual Del Usuario

Instructions for safe use

Instructions for safe use
Introduction
Océ designed products are tested in accordance with the strictest international safety
standards. It is important that you observe the safety rules included in this appendix
to help assure safe working with the Océ TDS700.
Maintenance
Do not remove any screws from fixed panels.
Do not do any maintenance activities other than the maintenance activities for the
parts and the maintenance materials described in this manual.
Do not place any liquids on the machine.
Use maintenance materials and other materials for their original purpose only.
Keep maintenance materials away from children.
Do not mix cleaning fluids or other substances.
To avoid the risk of introducing hazards, all modifications to Océ equipment are
strictly reserved to properly qualified and trained service technicians.
Connection
Attention: Do not move the machine yourself, but contact your Customer
Service.
It is recommended to connect only those products which meet the (inter)national
product safety and radio frequency interference standards, and to use an
attachment cable as specified by Océ.
If for some reason you have to move the machine yourself, please make sure that
the mains power point has the right fuse capacity. See the Océ TDS700 safety
data sheet in this appendix for information about maximum current.
Do not bridge any mechanical or electrical circuit breakers.
Do not use an extension lead to connect the machine.
This machine is not designed for connection to an IT power system. An IT power
system is a voltage network in which the neutral wire is not connected to earth.
When the machine is connected through a wall socket, place the machine near a
wall socket that is easily accessible.
When the machine is connected through a fixed connection to the electricity grid,
the disconnect device in the fixed connection must be easily accessible.
58 Chapter 7 Safety information (GB)