Installation Information - Alecto SA-100 Modo De Empleo

Detector de humo para uso domestico
Ocultar thumbs Ver también para SA-100:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

DO NOT INSTALL IN THE FOLLOWING LOCATIONS:
The kitchen; Steam from cooking might give a
false alarm.
The shower or bathroom; water damp might cau-
se a false alarm and the moist environment might
damage the detector.
The garage: The car exhaust might cause a false
alarm.
In front of a fan or nearby the exhaust of an air
conditioner or heater.
In a ceiling nook.
In rooms where the temperature could reach
below -10°C or beyond 40°C.
Do not paint or otherwise cover this smoke
detector.

INSTALLATION INFORMATION:

Attach the ceiling plate using the included plugs and
screws to the ceiling on a location of choice. Wall
mounting is not recommended for smoke detection.
Put the batteries in the detector. Then put the detec-
tor to the ceiling plate and, twist clockwise to lock it in
place. Perform a first test by holding the test key for
two seconds. Also see the paragraph: "Testing".

Publicidad

Tabla de contenido
loading

Tabla de contenido