Cequent Performance Products PRO Serie Manual Del Usuario página 2

Bicycle Loading:
1. Load first bike so that the gears and de-railer are facing away from the vehicle. Load so that the top
tube of the bicycle rest on the rack cradles.
2. Use a cradle strap through cradles and over top tube of bicycle. Secure by pressing hook and loop
together. Check to ensure bicycle is secure and unable to jump out of cradle. Fig 3a – 3d
3. Load additional bicycles as shown in Diagram 4, alternating the direction of each.
4. Bicycles should be loaded with heavier bicycles closest to vehicle.
Diagram 3
a)
Diagram 4
INSTRUCTIONS FOR FOLDING THE RACK:
1. To release pull bail pin.
2. Lower the tube slowly back until arm tube rests on ground.
NOTE: Do not drop or let the support tube fall freely. Make sure that your
hands and fingers are clear of the hinging area during this operation.
3. To restore the rack to the upright position, do reverse procedure.
4. Check periodically to insure you have a solid fit between the rack and the
mounting location.
Cequent Performance Products
Plymouth, MI 48170
ITEM
DESCRIPTION
b)
Page 2 of 9
63144
:
:
4 Bike Carrier
c)
d)
Diagram 5
63144N Rev A 08-11
Printed in XXXXXX