Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_DOKU-27420-001.fm Page 14 Monday, August 22, 2011 2:53 PM
❏ Use only original Würth batteries with the
voltage listed on the nameplate of your
power tool. When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as prop-
erty damage through exploding batteries.
❏ Use only original Würth accessories.
Intended Use
The machine is intended for driving in and loosening
screws and bolts as well as for tightening and loosen-
ing nuts within the respective range of dimension.
For damage caused by usage other than intended,
the user is responsible.
Product Features
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1 Screwdriver bit with ball catch*
2 Tool holder
3 Locking sleeve
4 "PowerLight"
5 Fixture for carrying strap
6 Battery unlocking button*
7 Battery*
8 Rotational direction switch
9 On/Off switch
10 Battery charge-control indicator
11 Handle (insulated gripping surface)
12 Universal bit holder*
13 Screwdriver bit*
* The accessories illustrated or described are not
included as standard delivery.
Tool Specifications
Cordless Impact Screwdriver
Art. No.
Rated voltage
No-load speed
Impact rate
Maximum torque, hard
screwdriving application
according to ISO 5393
Bolt size
Max. screw dia.
Tool holder
Weight according to
EPTA-Procedure 01/2003
Noise/Vibration Information
Measured sound values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 87 dB(A); Sound power
level 98 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncer-
h
tainty K determined according to EN 60745:
Impact tightening of fasteners of the maximum
capacity of the tool: a
=9 m/s
h
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep hands warm,
organise work patterns.
ASS 10-A
0700 622 X
V=
10.8
-1
min
0 – 2600
-1
min
0 – 3100
Nm
105
M4 – M12
mm
8
¼" hexagon
socket
kg
1.0
2
2
, K =1.5 m/s
.
14
Publicidad
Tabla de contenido
