Product Description And Specifications; Intended Use; Product Features - Würth BS 14,4-A EC Power Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-2979-001.book Page 16 Friday, October 7, 2016 10:06 AM
 Hold the machine with a firm grip. High reaction
torque can briefly occur while driving in and loosening
screws.
 When working with the machine, always hold
it firmly with both hands and provide for a
secure stance. The power tool is guided more secure
with both hands.
 Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
 Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power
tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
 In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
 Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
 The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.
 The battery is supplied partially charged. To
ensure full battery capacity, completely
charge the battery in the battery charger
before using for the first time.
 Read the operating instructions of the battery
charger.
 Adjust the gear switch only when the machine
is at a complete stop.
 Always push the gear selector and turn the
operating mode selector switch through to the
stop. Otherwise, the machine can become damaged.
 Before any work on the machine (e. g., main-
tenance, tool change, etc.) as well as during
transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional
actuation of the On/Off switch can lead to injuries.
 Use only original Würth accessories.

Product Description and Specifications

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
"Combi" machines are additionally intended for impact drill-
ing in bricks, brickwork and masonry.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.

Product Features

The numbering of the product features refers to the illustration
of the machine on the graphics page.
1 Tool holder
2 Keyless chuck
3 Depth stop
4 Auxiliary handle (insulated gripping surface)
5 Intermediate piece of auxiliary handle
6 Wing bolt for depth stop adjustment
7 Torque presetting ring
8 Mode selector switch
9 Gear selector
10 Belt clip
11 Battery pack
12 Battery unlocking button
13 Worklight
14 Overload protector indicator
15 Universal bit holder*
16 Rotational direction switch
17 On/Off switch
18 Handle (insulated gripping surface)
* The accessories illustrated or described are not
included as standard delivery.
16