Tabla de contenido
Publicidad
Do not pull on the cable to remove the plug from the power socket. Make sure the machine is switched off
before you disconnect it from the power supply.
in rain. Clean it with a damp cloth only.
2.2 SAFETY IN YOUR WORKING ENVIRONMENT
Ensure that your work area is always well-ventilated and well-lit so as to prevent accidents. In order to
Do not use the machine outdoors.
are in a vertical position to keep them away from walls and other obstructions.
2.3 OPERATING SAFETY TIPS
This single-disc sander should only be operated by skilled professionals who have carefully read and
This machine should be used ONLY for its intended purpose by personnel experienced in using machines
like it.
Always use work gloves when operating this machine.
Do not pull on the power cable. Do not allow the machine to roll over the power cable. Do not let the cable
safety goggles and clothing when recommended to do so.
can reach it.
4 EN
3. OPERATING THE MACHINE
3.1 STARTING OFF
has been transported:
Carefully unpack the machine. Dispose of unwanted packaging in an environmentally friendly manner.
Now attach the cover plate to the drive assembly.
Attach the push rod assembly to the drive assembly using three M8×55 mounting screws and three M8
screw nuts. Ensure that the screws are securely tightened.
Attach the provided power cable to the drive assembly and the push rod assembly.
Pull the lever underneath the grip on the right side of the machine toward you in order to unlock it. Pull the
Switch the machine off and unplug it from the power source.
Tip the machine backwards over its wheels until the push rod lies on the ground.
terclockwise.
as described above.
3.2 OPERATING THE MACHINE
3.2.1 Use as a sanding machine
Attach the machine to a power supply.
the machine operating in one spot.
-
Lowering the handle / push rod = MOVEMENT TO THE LEFT
Raising the handle / push rod = MOVEMENT TO THE RIGHT
ning over it with the machine!
-
-
EN 5
Publicidad
Capítulos
Tabla de contenido
