Ce Declaration; Terms Of Guarantee - Menzer ESM 406 Manual Original

7. CE DECLARATION

We hereby declare that the machine described below complies with the relevant basic safety and health
Product: Single-disc Sander
Type: MENZER ESM 406
Relevant EU Directives
2004/108/EC
2006/42/EC
Applied harmonized standards
EN 55014-1: 2006 + A1: 2009
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009
EN 61000-3-3: 2008
EN 60335-1: 2002 + A1: 2004 + A11: 2004 + A2: 2006 + A12: 2006
+ A13: 2008 + A14: 2010
EN 60335-2-10: 2003 + A1: 2008
EN 62233: 2008
Applied national standards
-
Torsten Ceranski
Managing Director
CGL GmbH
Straße des 17. Juni 4
04425 Taucha
Germany
12 EN

8. TERMS OF GUARANTEE

from the time the tool is purchased.
We guarantee that our power tools are free from defects in material or workmanship. Should this not be the
ment of defective parts free of charge. Any further entitlements on the part of the Purchaser – provided there
is no legal obligation – shall be excluded. Availing of warranty provisions does not bring about an extension
of the warranty term.
The MENZER Manufacturer's Warranty is only valid under the condition that the power tool is used in ac-
your proof of purchase. Power tools sent without pre-paid postage will not be accepted. Please note that
www.menzer-tools.com > Services
email: service@menzer-tools.com
phone: +49 342 98 74 14 15
This warranty only covers correct use of the power tool as is intended. The warranty excludes in particular:
Parts subject to operational wear
Defects resulting from improper use or disregard for operating instructions.
Power tools that have been dismantled
Damage caused by overloading the power tool
Damage which is caused by the power tool
Damage caused by the use of excessive or inappropriate force
commissioned by the Purchaser or by a third party
Warranty repairs may only be carried out at MENZER service workshops.
Your statutory and/or other agreed rights are unaffected by the granting of this warranty.
-
EN 13