Maintenance; Care And Maintenance; Important; Troubleshooting - Menzer ESM 406 Manual Original

5. MAINTENANCE

5.1 CARE AND MAINTENANCE

IMPORTANT: ensure that the plug has been removed from the power socket before servicing the machine!
Keep the machine clean by regularly wiping it down with a damp cloth.
Keep the driving discs and brushes in good condition.
Immediately replace worn or damaged machine parts and always ensure that the power cable is undam-
aged before you switch on the machine.
Remove the brush and the pad holder after each use. Clean these parts and store them in a dry place.

5.2 TROUBLESHOOTING

The machine does not operate.
The disc is skipping.
The machine makes unusual noises.
8 EN
1. Check that the plug is plugged into the power
socket.
2. There may be no current running through the
plug. Check the plug fuse and the start/safety
switches for damage.
1. You may have used the brush without using a
moist cleaning agent.
2. Check that the driving disc or brush is in the
correct position. Attach the driving disc or
brush correctly.
The screws on the chassis may be loose and need
to be retightened.
EN 9