Know Your Pressure Washer - Generac 1538-1 Manual Del Propietário

Ocultar thumbs Ver también para 1538-1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Chemical Injection Siphon/Filter
Nozzle Extension with
Quick Connect
Pressure
Control Knob
Water Inlet
Pump equipped with
Automatic Cool Down System
Accessory Tray — Provides convienant storage for
standard and optional accessories, such as brushes, turbo
wands, ect.
Air Filter — Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System — Cycles water through
pump when water reaches 140°-145°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke Lever — Prepares a cold engine for starting.
Fuel Valve — Used to turn fuel on and off to engine.
Gas Tank — Fill tank with regular unleaded gasoline. Always
leave room for fuel expansion.
High Pressure Hose — Connect one end to the water
pump and the other end to the spray gun.
Generac Portable Products 2,500 PSI High Pressure Washer
Spray Gun
Gas Tank
High Pressure Outlet
with Quick Connect
High Pressure Outlet with Quick Connect — To
connect high pressure hose.
Nozzle Extension with Quick Connect — Allows you to
switch between four different spray nozzles.
Oil Fill Cap — Fill engine with oil here.
Pressure Control Knob — Varies the pressure of the high
pressure spray.
Pump — Develops high pressure.
Recoil Starter — Use for starting the engine manually.
Safety Goggles — Always use the enclosed goggles or
other eye protection when running your pressure washer.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Spray Nozzles — Chemical injection (25°), 0°, 15°, 25°, and
40°: for various high pressure cleaning applications.
Throttle Lever—Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connect garden hose here.
4
Accessory Tray
Spray Nozzles
High Pressure Hose
Safety Goggles
Air Filter
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
(on front of engine)
Oil Fill Cap

Publicidad

Tabla de contenido
loading

Tabla de contenido