KNOW YOUR PRESSURE WASHER
Read this owner's manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Spray Gun
High Pressure Hose
Spray Nozzles
Pump equipped with
Automatic Cool Down System
Air Filter — Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke Lever — Prepares a cold engine for starting.
Fuel Valve — Used to turn fuel on and off to engine.
Gas Tank — Fill tank with regular unleaded gasoline. Always
leave room for fuel expansion.
High Pressure Hose — Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet with Quick Connect — To
connect high pressure hose.
Generac Portable Products 3000 PSI Pressure Washer
Nozzle Extension with
Quick Connect
Pressure
Control Knob
Chemical Injection Siphon/Filter
Gas Tank
Water Inlet
Nozzle Extension with Quick Connect — Allows you to
switch between four different spray nozzles.
Oil Fill Cap — Fill engine with oil here.
Pressure Control Knob — Varies the pressure of the high
pressure spray.
Pump — Develops high pressure.
Recoil Starter — Use for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Spray Nozzles — Chemical injection (25°), 0°, 15°, 25°, and
40°: for various cleaning applications.
Throttle Lever—Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connect garden hose here.
4
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
(on front of engine)
Air Filter
Oil Fill Cap
High Pressure Outlet
with Quick Connect