Installation Instruction; Installation Place Choose - EAS ELECTRIC E300WHF Manual De Usuario

4. Installation Instruction

4.1 Installation place choose

1. This unit can be installed indoors or in the closed balcony, but shall not be subjected to the rain.
2. LCD panel shall not be subjected to long-term exposure to the sun.
3. There must be adequate space for installation and maintenance.
4. There is no obstruction in the air outlet, and keep dry ventilation.
5. There should be convenient for pipe installation, condensate water drainage and electrical connection.
6. If this water heater is installed on the metal parts of building, electrical insulation work must be properly
carried out. Also, the relevant technical standards of electrical equipment shall be fulfilled.
7. Please refer to 4.5 if the machine installs in the outdoor.
Unit failure may be caused if the water heater is installed in the following place. Please consult with local
authorized service center if the water heater has to be installed in the following places.
1. Places with relatively abundant salt in the air like places by the sea;
2. Places with existence of corrosive gases;
3. Places like factories with serious fluctuation of supply voltage;
4. Places with big vibration and swing like car or cabin;
5. Places with existence of strong electromagnetic wave;
6. Places with mineral oils, such as cutting oil;
7. Places with flammable gas or subjects;
8. Places with acidic or alkaline gas evaporation;
9. Other places with special environmental conditions.
V.2 39