EAS ELECTRIC E300WHF Manual De Usuario página 49

10. Vacation setting cancelling
After timing setting successful, press and hold the
press the and
11. The priority of vacation mode and weekly timer.
The vacation setting priority is higher than the weekly time setting. When the vacation starts and the shutdown
command is executed, the weekly timing setting is no longer executed as well. When the vacation ends, the switch on
command will be executed firstly, then the weekly timing function is executed.
Vacation mode is prior to weekly timer mode. When the machine power off according to the vacation setting, the
weekly timer settings are invalid. After vacation period and machine is power on, it would works according to the weekly
timer settings.
12. Sterilization function
Sterilization function is divided into manual and automatic. The wired controller for domestic market is a manual one,
automatic invalid (parameter F25, 1). The one for oversea market has manual and automatic (parameter F25, 0). During
sterilization operation, the sterilization sign is light on, and when sterilization is completed, the sterilization sign will light off.
13. Manual sterilization
Press the button on panel or press and hold the
would run sterilization function according to the pre-set sterilization water temperature (default 60℃, ranges 60~80) and
sterilization hot water preservation time (default, ranges 0~60), the sterilization symbol would displayed on the screen.
14. Automatic sterilization
When the machine power on, the controller would record the automatic sterilization period. If time interval is greater
than the sterilization period, it would start sterilization since the time interval bigger than the sterilization starting time
（default 7 days, ranges 5~10 days; default 1:00, setting ranges 0~24 hours）. And the sterilization operates according to
the set sterilization water temperature （ default 60℃, setting ranges 60-80℃） and default sterilization hot water
preservation time (10minutes, setting ranges 5~60 minutes）.
V.2
5. Operating Instruction
buttons at the same time). The time setting is cancelled.
button at the same time for 3 seconds (if without the
and buttons simultaneously for 1 second, the machine
49
button,