Product Features; Package Contents; Optional Accessories - Tripp-Lite P948-BRKT25 Manual Del Propietário

Product Features

• Increase the performance of your desktop computer by adding the speed of a 2.5" Solid
State Drive (SSD)
• Easily transfer data from a 2.5" laptop drive to your desktop computer
• Mount a 2.5" SATA laptop hard drive into a vacant 3.5" bay in a desktop chassis
• Turn an unused 2.5" SATA drive into additional storage for your desktop computer
• Solid steel construction

Package Contents

• P948-BRKT25 Bracket
• SATA Adapter Cable
• Screws (x8)
• Owner's Manual

Optional Accessories

• P999-000 Anti-Static Wrist Strap
Installation
Notes:
• Computer equipment can be static-sensitive and requires proper care. An Anti-Static ESD Wrist Strap or
similar grounding device should always be used when handling a hard drive.
• Be sure your computer is turned off and you are properly grounded prior to installation
• If your drive has not been formatted yet, you will first need to format it using your computer's Disk
Management utility in order to copy and access files.
1. Connect the 22-Pin SATA Data + Power end of the included SATA adapter cable to the
SATA port on your hard drive.
2. Secure the hard drive to the bracket using the provided screws.
3. Remove your PC cover.
4. Insert the bracket into an open 3.5" drive bay, securing the bracket to your computer case.
5. Connect the other end of the SATA adapter cable to an LP4 power connector on the
computer power supply and to an available SATA Data connector on the host motherboard.
16-10-249-93365C.indb 2
2
11/2/2016 4:21:45 PM